In relation with my wooden case project, I came to think of that it would be nice to have a digital thermometer mounted, and I found one that I could use. Only problem was that this had one external and one internal diode. I wanted two externals...
This is how I fixed that minor problem:
The tools you need to do this is what you see in this picture (notice the black cord: It is from a l
Open the box
Locate the internal thermistor
Remove it, and twist the cord around one of the pins
Solder the other end of the wire to the PCB
...and rip the guts out
See?? Easy as a piece of pie!!
This is how it looks like when I put it inside my case.